Indications

For The Treatment And Control Of:

Dosage

One block treats 8,000 lb. (500 lb. of cattle per 1.5 lb.).

Adequate forage must be available at all times to cattle receiving supplemental block feeding.

Safe-Guard® (fenbendazole) ENPROAL® Molasses Block is designed for deworming pastured cattle by feeding these medicated blocks for three (3) days only as the sole source of salt.

It is essential to establish full cattle adaptation to supplemental block feeding prior to treating cattle with Safe-Guard® ENPROAL® Molasses Block. Cattle behavior and per capita consumption must be established by feeding nonmedicated ENPROAL® Blocks prior to medicated block treatment. Adaptation to block feed intake for medicated treatment may take twelve (12) to nineteen (19) days of prior exposure to unmedicated feed blocks depending on consumption rates and environmental conditions. When cattle block consumption of 0.1 pound (1.6 ounces) per 100 pounds of body weight (or 1.0 pound for a 1000-pound cow) per day is attained for several days on the nonmedicated ENPROAL® Block, the three (3) day medicated treatment with Safe-Guard® ENPROAL® Molasses Blocks may begin.

For effective treatment, the cattle must consume an average 0.1 pound of Safe-Guard® ENPROAL® Molasses Block per 100 pounds of body weight each day for three (3) days of treatment. This is equivalent to an average of one (1) pound per head per day to a 1000-pound cow for three (3) days of treatment in order to provide a total dose of 2.27 mg fenbendazole per pound of body weight.

To commence deworming treatment, replace the nonmedicated blocks with Safe-Guard® ENPROAL® Molasses Blocks. Place these medicated blocks at the same locations where cattle have demonstrated adequate per capita block intake (0.1 pound per 100 pounds of body weight per day).

DAILY TREATMENT (TO BE CONTINUED FOR THREE (3) DAYS ONLY):

*NUMBER OF HEAD FULLY TREATED BY EACH BLOCK WHEN CONSUMED IN THREE (3) DAYS.

Following the three (3) day treatment any remaining Safe-Guard® ENPROAL® Molasses Blocks should be removed from the pasture, and cattle may be returned to their normal supplemental feeding program. Remaining blocks, or portions of blocks, can be utilized for retreatment purposes if used prior to expiration date shown below.

It is essential that good block feeding husbandry practices be followed at all times. Block feeding techniques include, but are not limited to, a variety of practices. Blocks should first be located in those areas where cattle are seen to browse or loaf. It may be desirable to relocate unconsumed blocks to locations where obvious block consumption is identified. Increased consumption may often be obtained by moving feeding stations into shaded or loafing areas, closer to water source, increasing the number of blocks available to the animals or combinations of these practices. Decreased consumption may often be obtained by the reverse of the above practices.

Drug Feeding Rate

1.67 mg fenbendazole per kg body weight per day for three (3) days. Total dose for the three (3) day period of 5 mg fenbendazole per kg of body weight (2.27 mg fenbendazole per pound).

Supplied

25 LBS (11.34 kg)

Active Ingredient

Fenbendazole 750 mg/lb

Warnings

NOT FOR USE IN HUMANS. KEEP OUT OF REACH OF CHILDREN.
The Safety Data Sheet (SDS) contains more detailed occupational safety information. For customer service, adverse effects reporting, and/or a copy of the SDS, call 1-800-211-3573. For additional information about adverse drug experience reporting for animal drugs, contact FDA at 1-888-FDAVETS, or http://www.fda.gov/reportanimalae.

Other Warnings

Parasite resistance may develop to any dewormer, and has been reported for most classes of dewormers. Treatment with a dewormer used in conjunction with parasite management practices appropriate to the geographic area and the animal(s) to be treated may slow the development of parasite resistance. Fecal examinations or other diagnostic tests and parasite management history should be used to determine if the product is appropriate for the herd, prior to the use of any dewormer. Following the use of any dewormer, effectiveness of treatment should be monitored (for example, with the use of a fecal egg count reduction test or another appropriate method). A decrease in a drug’s effectiveness over time as calculated by fecal egg count reduction tests may indicate the development of resistance to the dewormer administered. Your parasite management plan should be adjusted accordingly based on regular monitoring.

CONSULT YOUR VETERINARIAN FOR ASSISTANCE IN THE DIAGNOSIS, TREATMENT AND CONTROL OF PARASITISM.

Important Safety Information

Do not use in beef calves less than 2 months old, dairy calves and veal calves. A withdrawal period has not been established for this product in pre-ruminating calves. Additionally, the following meat withdrawal and milk discard times apply:
Safe-Guard ENPROAL Type C Medicated Block: Cattle must not be slaughtered for 11 days. For use in beef cattle only.

Contact

U.S. only: Merck Animal Health
The Safety Data Sheet (SDS) contains more detailed occupational safety information.
For customer service or to request a copy of the SDS, please call 1-800-521-5767 or email directsupport@merck.com.
For product questions or to report an adverse event, call 1-800-211-3573 or email uslivestockpv@merck.com.
For additional information about adverse drug experience reporting for animal drugs, contact FDA at 1-888-FDAVETS, http://www.fda.gov/reportanimalae.
For more information regarding efficacy and safety data, go to http://productdata.aphis.usda.gov
For additional information, please see the product label.